Eaton Powerware BladeUPS none User Manual page 23

11. Secure the front of the EBM to the rack using two hex-head screws
in each mounting bracket as shown in Figure 7.
12. Attach the rear hold-down brackets to the rail and slide the brackets
into the slots on the EBM rear panel (see Figure 8).
EATON Powerware
® BladeUPS ® EBM User's Guide
Figure 7. Securing the EBM Mounting Brackets
Figure 8. Securing the Back of the EBM
S
164201650 Rev 2 www.powerware.com
INSTALLATION
Hex-Head
Screws
Rear Hold-Down
Bracket
19