Table of Contents
Advertisement
S5-115F Manual
Generating nonstandard error message texts
If you want to evaluate the operating system error messages yourself and store your own error
message texts on the memory submodule of the CP 523, please read the following information on
the structure of error message frames.
You can change error texts as you wish. Generation of message texts is described in detail in the
CP 523 Manual.
Error message frames from the operating system to the CP 523 are always four words long.
The job number and message text number of all error message frames is output in the first word.
The job number has the value "4
without line feed.
The subsequent three words contain additional information, which you can insert in the message
text as variables.
The message text number output by the operating system always applies to the relevant error
group. See the following table for the assignment of message text numbers to relevant error
groups.
Table 7-25. Assignment of Message Text Number to Error Group
Message Text Number
3851
3852
3853
3854
3846
3841
3842
3843
3844
3845
3847
3848
3849
3850
3855
The subsequent information in words 2 to 4 varies according to the message text number.
The message text numbers and the relevant IDs are given in the following overviews.
EWA 4NEB 811 6148-02
", i.e. the CP 523 message texts output by the CP 523 are printed
D
Error
I/O error: DI, CH-DQ
I/O error: DQ, R-DI
I/O error: AI, CH-AQ, CH-DQ
I/O error: QVZ (time-out)
SINEC L1 error
CPU error
IM 304/324 or CPU error
USER MEMORY submodule error
Operating system EPROM error
Battery fault
Error: warm restart required
Error: power off in restart
STOP switched by user program
Handling error
Unassigned
Communications Capabilities
Error Group
8, 9, 10
8, 9, 10
8, 9, 10
19
2, 3, 7, 13, 15
1, 4, 20, 23
6, 24, 30
5
25
17
18
26
12, 14, 16, 21, 31
0, 22, 27, 28, >31
7-39
Advertisement
Table of Contents
