Table of Contents
Advertisement
•
Selecting a language
•
Launching other preboot environments such as the Embedded UEFI Shell
For more information, see the UEFI System Utilities user guide on the Hewlett Packard Enterprise website.
To access mobile-ready online help for the UEFI System Utilities and UEFI Shell, scan the QR code at the
bottom of the screen. For on-screen help, press the F1 key.
Using UEFI System Utilities
To use the System Utilities, use the following keys.
Action
Access System Utilities
Navigate menus
Select items
Save selections
Access Help for a highlighted configuration
1
option
1
Scan the QR code on the screen to access online help for the UEFI
System Utilities and UEFI Shell.
Default configuration settings are applied to the server at one of the following times:
•
Upon the first system power-up
•
After defaults have been restored
Default configuration settings are sufficient for typical server operations; however, you can modify
configuration settings as needed. The system prompts you for access to the UEFI System Utilities each time
the system is powered up.
Embedded Diagnostics option
The system BIOS includes an Embedded Diagnostics option in the ROM. The Embedded Diagnostics option
can run comprehensive diagnostics of the server hardware, including processors, memory, drives, and other
server components.
For more information on the Embedded Diagnostics option, see the UEFI System Utilities user guide for your
server on the Hewlett Packard Enterprise website.
Re-entering the server serial number and product ID
About this task
After you replace the system board, you must re-enter the server serial number and the product ID:
Procedure
1. During the server startup sequence, press the F9 key to access UEFI System Utilities.
2. Select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options >
Advanced System ROM Options > Serial Number, and then press the Enter key.
3. Enter the serial number and press the Enter key.
The following message appears:
60
Using UEFI System Utilities
Key
F9 during server
POST
Up and Down
arrows
Enter
F10
F1
Advertisement
Table of Contents
