Table of Contents
Advertisement
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server with the access panel
and the M.2 SSD compartment cover open or removed.
Procedure
1. Align the rear screw holes of the communication board to the middle frame.
2. Press the front end of the communication board until it clicks into place.
3. Install the RJ-45 port spacer.
Ensure that the spacer is flush against the rear panel surface.
4. Align the RJ-45 port bracket to the middle frame.
5. Install the RJ-45 port bracket screws according to the numbering indicated on the bracket.
38
Removal and replacement procedures
2
1
2
1
Advertisement
Table of Contents
