Table of Contents
Advertisement
Switch Housing
www.HunterFan.com
1.888.830.1326
Screw two housing assembly screws from
Feed the wire plug through the center
Insert the third screw, found in the
the
hardware bag halfway into the
hole of the upper switch housing, then
hardware bag, into place and then
motor housing. It does not matter which
wrap keyhole slots around the screws and
tighten all three screws.
two screw holes you choose.
twist counterclockwise.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all three assembly screws could result in the
switch housing fixture falling.
11
M0136-01 • 05/26/17 • © 2017 Hunter Fan Company
Advertisement
Table of Contents
