Hunter M0136-01 Manual page 7

Wiring: Single Switch
Have a single switch?
Follow these steps:
Connect the three
grounding wires (green,
green/yellow stripe, or
bare copper) coming from
the ceiling, downrod, and
hanging bracket.
Refer to CAUTION c.1 on pg. 2
Grounding
M0136-01 • 05/26/17 • © 2017 Hunter Fan Company
White
Black
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
7
www.HunterFan.com
1.888.830.1326
Dual Switch
Instructions
Connect the white
(grounded) wire from
the ceiling to the white
wire from the fan.
Connect the black wire
(ungrounded) from the
ceiling to the black and the
blue wires from the fan.
Note: To connect the wires,
hold the bare metal leads
together and place a wire
connector over them, then
twist clockwise until tight.