Table of Contents
Advertisement
Switch Housing
www.HunterFan.com
1.888.830.1326
Feed the wire plug through the center
Screw two housing assembly screws
Insert the third screw, found in
hole of the upper switch housing, then
from the
hardware bag halfway into
the
hardware bag, into place and
the motor housing. It does not matter
wrap keyhole slots around the screws and
then tighten all three screws.
twist counterclockwise.
which two screw holes you choose.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing fixture falling.
13
M0119-01 • 10/25/16 • © 2016 Hunter Fan Company
Advertisement
Table of Contents
