Light Kit - Hunter M0136-01 Manual

Light Kit

Switch
Housing
Screw
Partially install two of the switch housing
screws found in the hardware bag. Connect
the plugs from the upper and lower switch
housings. Make sure to line up the colored
markings on the connectors.
Want to install your fan without a light kit?
Go to www.HunterFan.com/FAQs and click
"How do I install my fan without the light kit?"
Notch
Switch
Housing
Screw
Align the notches in the sides of the lower
switch housing with the upper switch
housing screws. Lift the lower switch housing.
Twist the lower switch housing clockwise to
lock into place. Then thread the fan pull chain
through the hole in the light kit.
12
M0136-01 • 05/26/17 • © 2017 Hunter Fan Company
www.HunterFan.com
Install the third switch housing screw.
Tighten all three screws securely.
Make sure the lower switch housing is securely attached
to the upper switch housing. Failure to properly secure all
three assembly screws could result in the light fixture falling.
1.888.830.1326