Kodak DryView 8150 Safety Manual page 51

September 2002
Baud Rate Configuration Command (FF
This command is used to change the baud rate of the reader.
Data Byte (1byte) = Baud rate code
09 = 57600 baud (default)
08 = 38400 baud
07 = 19200 baud
06 = 9600 baud
Example
Set Baud rate to 57600baud.
Request packet
01 0A 00 00 00 00 FF 09 FD 02
Set Baud rate to 38400baud.
Request packet
01 0A 00 00 00 00 FF 08 FC 03
Set Baud rate to 19200baud.
Request packet
01 0A 00 00 00 00 FF 07 F3 0C
Set Baud rate to 9600baud.
Request packet
01 0A 00 00 00 00 FF 06 F2 0D
The response packet is similar to the request packet with the data section containing
'00 ' for a successful operation.
hex
Example
Response packet
01 0A 00 00 00 00 FF 00 F4 0B
Command successful.
Note:
Changing this parameter only becomes effective after a power-on
reset of the reader.
S6350 Midrange Reader Module - Reference Guide
)
hex
hex
hex
hex
hex
hex
25