Kodak DryView 8150 Safety Manual page 16

Guidance and Manufacturer's Declaration for Electromagnetic Emissions
The Kodak DryView 8150 Laser Imager is intended for use in the electromagnetic environment specified below. The
customer or user of the Kodak DryView 8150 Laser Imager should assure that it is used in such an environment.
Emissions Test
RF emissions:
• EN55011
• CISPR 11
RF emissions:
• EN55011
• CISPR 11
Harmonics emissions:
• EN61000-3-2
• IEC 61000-3-2
Voltage fluctuations and
flicker emissions:
• EN61000-3-3
• IEC 61000-3-3
September 27, 2004
Europe and the Rest of the World
Compliance Electromagnetic Environment - Guidance
Group 1 The Kodak DryView 8150 Laser Imager uses RF energy only for its
internal function. Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic equipment.
Class A The Kodak DryView 8150 Laser Imager is suitable for use in all
establishments other than domestic and those directly connected to
the public low-voltage power supply network that supplies buildings
used for domestic purposes.
Class A The Kodak DryView 8150 Laser Imager is suitable for use
everywhere, including those establishments directly connected to the
public low-voltage power supply network that supplies buildings used
for domestic purposes.
Complies The Kodak DryView 8150 Laser Imager is suitable for use
everywhere, including those establishments directly connected to the
public low-voltage power supply network that supplies buildings used
for domestic purposes.
7F3779
Safety and Related Information
1-11