Kodak DryView 8150 Safety Manual page 28

September 2002
Third Edition - September 2002
This is the third edition of this manual. It describes the following product:
S6350 Midrange Reader Module
Firmware Version 1.44
Major Changes: - Addition of Baud Rate Configuration Command
to discontinue any product or service at any time without notice. TI provides customer
assistance in various technical areas, but does not have full access to data concerning
the use and applications of customer's products
Therefore, TI assumes no liability and is not responsible for customer applications or
product or software design or performance relating to systems or applications
incorporating TI products. In addition, TI assumes no liability and is not responsible for
infringement of patents and/or any other intellectual or industrial property rights of third
parties, which may result from assistance provided by TI.
TI products are not designed, intended, authorized or warranted to be suitable for life
support applications or any other life critical applications which could involve potential
risk of death, personal injury or severe property or environmental damage.
- Note to ISO Read Multiple Blocks Command
Texas Instruments (TI) reserves the right to make changes to its products or services or
The TIRIS and TI-RFid logo, the words TIRIS, TI-RFid, TI-RFID
trademarks or registered trademarks of Texas Instruments Incorporated (TI).
Copyright © 2002 Texas Instruments Incorporated (TI).
This document may be downloaded onto a computer, stored and duplicated as
necessary to support the use of the related TI products. Any other type of duplication,
circulation or storage on data carriers in any manner not authorized by TI represents a
violation of the applicable copyright laws and shall be prosecuted.
S6350 Midrange Reader Module - Reference Guide
RI-STU-TRDC-02
2
and Tag-it are