Relevant Manuals - Omron NJ501-1300 User Manual

Relevant Manuals

Relevant Manuals
The following table provides the relevant manuals for the NJ-series CPU Units.
Read all of the manuals that are relevant to your system configuration and application before you use
the NJ-series CPU Unit.
The built-in EtherNet/IP port in the NJ-series CPU Unit is used for this product.
For details on how to use the built-in EtherNet/IP port, refer to the NJ/NX-series CPU Unit Built-in Eth-
erNet/IP Port User's Manual (Cat. No. W506)
Most operations are performed from the Sysmac Studio Automation Software. Refer to the Sysmac Stu-
dio Version 1 Operation Manual (Cat. No. W504) for information on the Sysmac Studio.
Purpose of use
Introduction to NJ-series Controllers
Setting devices and hardware
Using motion control
Using EtherCAT
Using EtherNet/IP
Software settings
Using motion control
Using EtherCAT
Using EtherNet/IP
Using OPC UA
Writing the user program
Using motion control
Using EtherCAT
Using EtherNet/IP
Programming error processing
Using OPC UA
Testing operation and debugging
Using motion control
Using EtherCAT
Using EtherNet/IP
Using OPC UA
Learning about error management and
*1
corrections
Maintenance
Using motion control
Using EtherCAT
Using EtherNet/IP
*1 Refer to the NJ/NX-series Troubleshooting Manual (Cat. No. W503) for the error management concepts and an overview
of the error items. Refer to the manuals that are indicated with triangles for details on errors for the corresponding Units.
2
Basic information
NJ-series CPU Unit OPC UA User's Manual (W588)
Manual