Reference Documents; Revision History; Csm Software Id; Figure 1. Key To Software Identification - McQuay MicroTech II Operation Manual

Reference Documents

Company Number
McQuay International IM781
McQuay International IM783
McQuay International IM735
McQuay International ED15062
McQuay International ED15075
McQuay International ED15077
Tridium, Inc -
Tridium, Inc -
McQuay International OM CentrifMicro II
McQuay International IOMM WPV
McQuay International IOMM WSCWDC-2
McQuay International OM AGS-1
McQuay International OM AGS-2
McQuay International IMM AGS-1
McQuay International IOMM AGZ-4
McQuay International IOMM WGZ-1
All documents are available at www.mcquay.com.

Revision History

OM 780-0 January 30, 2004
OM 780-1 April 6, 2004
OM 780-1 October, 2004
OM 780-1 November, 2004
OM 780-2 November, 2005

CSM Software ID

MicroTech II CSM software is factory installed and tested in each panel prior to shipment. The software is identified by a
program code (also referred to as the "Ident"), that is printed on a small label above the controller.

Figure 1. Key to Software Identification

The program code is also encoded in the controller's memory and is available for display on the CSM Configuration
Screens.
OM 780-2
Title
MicroTech II Chiller System Manager Installation Manual
MicroTech II Remote I/O Panel Installation Manual
MicroTech II Chiller Unit Controller
MicroTech II Chiller Controller Protocol Information
MicroTech II Chiller System Manager Protocol Information, BACnet® Networks
MicroTech II Chiller System Manager Protocol Information, Modbus® Networks
Net Connect Guide
Using the Admin Tool
MicroTech II Unit Controller for Centrifugal Chillers and Templifiers Operating Manual
MicroTech II Centrifugal Chiller Installation, Operation, and Maintenance Manual
MicroTech II Chiller Unit Controller Installation, Operation, and Maintenance Manual
MicroTech II Controller for AGS Chillers Operating Manual
MicroTech II Air-Cooled Screw Chiller Operating Manual
MicroTech II Air-Cooled Screw Chiller Installation and Maintenance Manual
MicroTech II Air-Cooled Scroll Chiller Installation, Operation, and Maintenance Manual
MicroTech II Water-Cooled Scroll Chiller Installation Manual
First release.
Minor changes prior to Chinese translation.
Remove common supply control.
Add hardwired chiller appendix.
Updated the Hardware Selection field in Table 4. Added Evaporator Flow Sensor,
Condenser Flow Sensor and Solid State Starter fields to Table 5. Modified CSM Stop-
to-Start Timer description in the Hardwired Chiller Sequence of Operation section.
MicroTech II
Universal Controller
Hardware Version (numeric)
1 = 120 Vac, 2 = 208/240 Vac
Controller Type
Software Version (numeric)
Software Version Revision (zero then alphabetical)
Maximum Number of Chillers
L W
® Communication Module
ON ORKS
MTII-UC-1-CSM01.8-6
Page 7