Changing The Csm's Ip Address And Date/Time - McQuay MicroTech II Operation Manual

d. Select the Properties button.
e. Select the appropriate adapter.
f. Note the IP address and Subnet mask if they have values or that Obtain IP address automatically is selected.
g. Select Specify an IP address.
h. Change the Subnet mask to 255.255.255.0.
i. Change the IP address to 192.168.1.X (where X is unique on the subnet and not the same as the CSM's IP
Address).
j. Click on the Apply button.
To restore the network settings in a Microsoft Windows NT computer
1. Open the Control Panel on your computer.
a. Open the Network Applet.
b. Select the Protocols tab.
c. Select the TCP/IP-Ethernet card combination on the computer.
d. Select the Properties button.
e. Select the appropriate adapter.
f. Restore the settings as previously noted.
g. Click the Apply button.
Network Setting for Microsoft Windows 2000
To change the network settings in a Microsoft Windows 2000 computer
1. Select My Network Places on the desktop and right click.
2. Open Properties.
3. Select Local Area Connections and right click.
4. Open Properties.
5. Select TCP/IP.
6. Click on Properties button.
7. Note settings for future reference.
8. Select Use the following IP address.
9. Change the Subnet mask to 255.255.255.0.
10. Change the IP address to the IP address to 192.168.1.X (where X is unique on the subnet and not the same as the
CSM's IP Address).
11. Click OK
To restore the network settings in a Microsoft Windows 2000 computer
1. Select My Network Places on the desktop and right click.
2. Open Properties.
3. Select Local Area Connections and right click.
4. Open Properties.
5. Select TCP/IP.
6. Restore the network settings as previously noted.
7. Click OK.

Changing the CSM's IP Address and Date/Time

Now that you have changed the network settings on your PC to be compatible with the IP address of the CSM, you can
connect to the CSM with the Internet Explorer browser to assign it a unique IP address and other network settings. This is
a requirement if the CSM is to be used on a LAN so that its network settings will be compatible with the existing LAN.
Connection to the existing LAN provides multiple user access for the user's PC and also allows user access through high
speed Internet connections at remote locations. A document titled "Net Connect Guide" is available at
to assist you in making remote connections to the CSM. Close interaction with your building's IT department is required
for successful operation, obtain IP addressing and firewall security support from your IT department.
OM 780-2
www.mcquay.com
Page 13