Kenwood DRV-N520 Instruction Manual page 5

Dashboard camera
Table of Contents

Advertisement

bracket to improve. Failing to do so may
result in the adhesion of the mount
bracket becoming weak and the device
falling.
• Fix the cord in place with tape or the like
so that it does not interfere with driving.
Precautions for Use
• Do not block the camera lens, get dirt on
it, or place a reflective object near it.
• When LED traffic lights are recorded,
video in which they appear to
be flickering or flashing may be
recorded. JVC KENWOOD assumes
no responsibility with regard to the
distinguishing or recording of traffic
lights.
• If coating is used on the windshield of
the vehicle, recording quality may be
affected.
• There is no guarantee that the device
can record video in all conditions.
Cleaning the Device
• When the device is dirty, wipe it with
a dry silicone cloth or other soft cloth.
If the device is very dirty, remove the
dirt with a cloth with neutral cleaner
on it and then wipe off the cleaner.
Wiping the device with a hard cloth
or using a volatile substance such as
thinner or alcohol may cause scratches,
deformation, deterioration, or other
damage.
• When the lens is dirty, gently wipe it
with a soft cloth dampened with water.
Rubbing the lens strongly with a dry
cloth may cause scratches.
If You Notice a Problem with the Device
• If you notice a problem with the device,
first refer to
"Troubleshooting"(P.36)
and check whether there is a way to
resolve the problem.
• If you are unable to find a way to resolve
the problem, contact your dealer or
nearest JVC KENWOOD service center.
SD Cards
• Cards supported by this device
Standard
Capacity
Speed class
File system
• Up to the Class 10 speed class is
supported.
Precautions for using SD cards
• When using a commercially available
SD card, also check the instructions
supplied with the SD card.
• Be sure to format (initialize) an SD card
with the device before use.
• SD cards have a product lifespan, such
as the number of times that writing
can be performed. It is recommended
to replace the SD card with a new one
regularly depending on the usage
conditions.
• When inserting and removing an SD
card, confirm the orientation, do not
bend it, and do not apply a strong force
or impact to it.
• Do not directly touch the contact part
with a hand or metal. The stored data
may be damaged or lost due to static
electricity.
• Be sure to back up (copy) the required
files in the SD card to a PC or other
device. The saved data may be lost due
to the usage conditions of the SD card.
Please note that JVC KENWOOD cannot
compensate for any damages arising
from the loss of saved files.
microSDHC
8 GB to 32 GB
Class 6 or higher
FAT32
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents