Kenwood DRV-N520 Instruction Manual page 29

Recording Settings
[Resolution + HDR
Recording]
[Audio Recording]
[Continuous Recording File
Length]
[Manual Recording Time]
[Event Recording Time]
[Overwrite (Manual)]
[Overwrite (Event)]
[Sensitivity Settings]
[Interval of Automatic Still
Images Capture]
[Maximum Number of
Automatic Still Images]
Parking Recording Settings
[Parking Recordings]
[Recording Time]
[Overwrite]
[1280×720]/[1280×720+HDR]/[1920×1080]/[1920×1080+HDR*]/[3M](2304×1296)
Sets the recording resolution.
Set to (HDR) to record a subject with overexposure/
underexposure suppressed even in a situation involving large
differences in brightness. (The image quality cannot be set by
recording mode.)
ON*/OFF
Set whether or not to record audio with the microphone
during recording.
1 min*/2 min/3 min
Set the recording time for continuous recording. The recording
is divided each time the recording time elapses.
15 sec*/30 sec/1 min
Set the recording time for manual recording. The recording
time for before manual recording is set to 12 seconds.
15 sec*/30 sec/1 min
Set the recording time for after collision detection. The
recording time for before vehicle collision detection is set to 12
seconds.
ON/OFF*
Set whether or not to overwrite old files when the maximum
number of recording files will be exceeded.
ON/OFF*
Set whether or not to overwrite old files when the maximum
number of recording files will be exceeded.
1(Low)/2/3(Mid)*/4/5(High)
Set the sensitivity for detecting a vehicle collision.
1: Detects large collisions, 3: Standard, 5: Detects small
collisions
1 min/5 min*/15 min/30 min
Set the interval of capturing a still image with the automatic
still image capture function.
10 files/30 files*/50 files
Set the number of still images to be captured with the
automatic still image capture function.
ON*/OFF
Turns the parking recording function on or off.
10 sec*/20 sec/30 sec
Set the recording time for parking recording after collision
detection.
ON*/OFF
Set whether or not to overwrite old files when the maximum
number of recording files will be exceeded.
* Factory default settings
29