Download Print this page

Basic Operation - Kenwood DRV-N520 Instruction Manual

Dashboard camera
Hide thumbs

Advertisement

6.
Set the following items.
Item
Time Zone
Select the Time Zone.
UTC-12:00 to UTC+14:00
UTC+0:00*
Daylight
OFF*/+1 hr./+30 min
Saving Time
Set daylight saving time.
Time Format 12-Hour/24-Hour*
Date Format Month/Day/Year /
Day/Month/Year* /
Year/Month/Day
Notification
0/1/2*/3
Volume
Select Units
km /h, MPH*
* Factory default settings

Basic Operation

Inserting and Removing
an SD Card
Turn off the power of the device and then
insert an SD card into the SD card slot
until you hear a clicking sound.
To remove the SD card, turn off the power
of the device and then press the SD card
so that it pops up and remove the SD card
by pulling it out.
Explanation
Note
• Make sure that the device is powered
off (LED off ) before mounting or
demounting an SD card.
• Have only the data recorded by this
device stored on an SD card.
• This device will not be functional
without an SD card mounted in
position.
• Be sure to format an SD card with the
device.
Turning the Power On/Off
Turning on the accessories power (ACC)
switch or starting the engine of the vehicle
turns on the power of the device and starts
continuous recording. When the device is
connected using the power
turning off the accessories power (ACC)
turns off the power of the device and
switches to parking recording mode.
To Turn the Power On/Off Manually
When the accessories power (ACC) is on, the
power of the device can be turned on or off
manually.
• Hold down the [POWER] button for at least
1 second while the device is on to turn off
the power.
• Hold down the [POWER] button for at least
1 second while the device is off to turn on
the power.
code(P.10)
13

Hide quick links:

Advertisement

loading

  Related Manuals for Kenwood DRV-N520