Table of Contents
Advertisement
Network Mobile Camera·Quick Start Guide
Steps:
Camera
Figure 2-9 Water-proof Accessory Installation
1.
Feed the plugless network cable ⑦ through the lock nut ⑥,
waterproof rubber gasket ⑤ (rubber gasket inset ridge must
face waterproof endcap), and the water-proof endcap ④ in
order.
2.
Crimp an RJ-45 network plug ③onto the end of the cable,
taking care to insert the twisted pairs of wires in correct order.
3.
Place the O-type gasket ② onto the end of the camera's
network interface socket ①.
4.
Insert the network plug ③ into the camera's network interface
socket①.
Align the snap and notch.
i. Insert
ii. Secure
19
into
.
⑤
④
with
.
⑥
④
Switch/Router
Advertisement
Table of Contents
