Advertisement
the hand knob to left or right in order to take out gobo gel splint.
The Color Gel Splint Installation
At first, please push the Lock Cap button by hand as the arrow, and
move away the Lock as the arrow, then insert the color gel splint into
the inside slot from topside, and fasten the lock.
Troubleshooting
Following are a few common problems that may occur during
operation. Here are some suggestions for easy troubleshooting:
The fixture does not work, no light
Check the connection of power and main fuse.
Measure the mains voltage on the main connector.
Maintenance
Clean the front transparent cover at least every 1-2 months. Use a
moist, lint-free cloth. Never use alcohol or solvents!
4A
Advertisement
