Driver Installation - SIIG FireWire 800 Quick Installation Manual

Driver Installation

This section provides information on how to install the
FireWire 800 ExpressCard drivers.
Windows 7 (32-/64-bit)
Windows 7 automatically installs it's built-in FireWire
400 driver for the FireWire 800 ExpressCard. To get the full
speed out of this controller, install the FireWire 800
driver using the directions below.
1. Insert the driver CD, at the AutoPlay box, click Open
folder to view files.
For 32-bit: Double click setup32.
For 64-bit: Double click setup64.
2. Follow the on screen instructions to complete the
installation.
Windows Vista (32-/64-bit)
Windows Vista automatically installs it's built-in FireWire
400 driver for the FireWire 800 ExpressCard. To get the full
speed out of this controller, install the FireWire 800
driver using the directions below.
1. Insert the driver CD. Click Start.
For 32-bit: In the Start Search box, type
D:\setup32.exe, press Enter. (Change D: to match
your CD-ROM drive letter)
For 64-bit: In the Start Search box, type
D:\setup64.exe, press Enter. (Change D: to match
your CD-ROM drive letter)
2. Follow the on screen instructions to complete the
installation.
3