Table of Contents
Advertisement
(2) If using I-7570 module, please check "I-7570" item and select the
communication parameters of PC serial port. Note, the settings of the
communication parameters must be the same with those in I-7570.
4.2.2 HART Frame Settings
The following is the description of HART command fields.
Auto Configure :
Frame type
Master type
Preambles
Address
Manufacturer ID:
Device type
Device ID
I-7567 USB/HART Converter User's Manual (Ver 1.3, 2015/10/30) ------------- 29
Figure 4-2: Set Serial Port No.
(1) Enable : search HART devices automatically.
(2) Disable : search HART devices according to
manual parameters.
:
Select HART frame format (Short/Long).
:
Select Primary master or Secondary master.
:
Select 5~20 bytes (0xFF) number.
:
Select HART Polling Address (0~15).
Manufacturer Identification Code
:
Manufacturer Device Type Code
:
Manufacturer Device Identification Code.
Advertisement
Table of Contents
