Table of Contents
Advertisement
2.3
Terminator Resistor Settings
The DIP switch is used to provide HART network with 250 Ω (1/4 W)
resistor. When it is set to "On", the resistor will connect to HART network.
Otherwise, it will disconnect the resistor from HART network. The default
position of the DIP switch is in "On".
Figure 2-5: Enable Internal Resistor. Figure 2-6: Disable Internal Resistor.
I-7567 USB/HART Converter User's Manual (Ver 1.3, 2015/10/30) ------------- 12
Advertisement
Table of Contents
