2.5.2 LED indication Table
Power
LED Name
off
PWR LED
off
Tx LED
off
Rx LED
off
2.6
Cable Selection
The HART bus is a balanced (differential) 2-wire interface running
over a Shielded Twisted Pair (STP), Un-shielded Twisted Pair (UTP), or
Ribbon cable. How to decide a cable type, cable length, and terminator in
the HART bus network, please refer to the following table.
Note: The AWG means a standard method used to measure wire. The
numbering system works backwards from what people would think, the
thicker (heavier) the wire, the lower the number.
I-7567 USB/HART Converter User's Manual (Ver 1.3, 2015/10/30) ------------- 16
No
FW
Driver
Update
Operation
flash
off
flash
off
flash
off
FW
USB Port
Data Received
on
on
off
flash
off
off
HART Port
Data Received
on
off
flash