ICP DAS USA I-7567 User Manual page 38

The following is the function description of "HTCfg" screen. (Like Figure 4-
15)
(1) "DevAddr" Field: Assign the HART device for configuration.
(2) "Response" Field: Show the response message of HART
(3) "Universal" Page: Choose the "Universal" command for configuration.
(4) "Common" Page: Choose the "Common-Practice" for configuration.
(5) "Start" Button: Trig to send the HART configuration command.
(6) "Listen Mode" item: Check it and click the "Start" button, HC_Tool will
(7) "HART RecvMsg Count" Area: Show the total count of the received
I-7567 USB/HART Converter User's Manual (Ver 1.3, 2015/10/30) ------------- 38
Figure 4-14: HTCfg Item
configuration command.
(Support HART Command version
(Support HART Command version
listen HART bus and show the received HART
message information.
HART messages. (Including Master
sending message and Slave
response message)
v6.0)
v6.0)