1. Introduction
The I-7567 is a USB to HART converter specially designed as the
master device of HART protocol. It allows users to access the HART slave
via virtual COM-port of PC and the baud rate must be set 1200 bps.
When connecting I-7567 to PC, PC will load the relevant device driver
automatically (hot plug & play). Therefore, users can make data collection
and processing of HART network easier and quicker by applying I-7567. In
addition, by using the I-7567 utility, users can configure module and test
HART communication easily.
The following is the application structure of the USB/HART modules.
1.1
Features
Support HART Short/Long frame
Support HART Burst mode.
I-7567 USB/HART Converter User's Manual (Ver 1.3, 2015/10/30) ------------- 4