Precautions; Table Of Contents - Carrier Xpower Series Installation Manual

CONTENTS

PRECAUTIONS........................................................................................1

CONSTRUCTION CHECKPOINTS..............................................................2
ACCESSORIES........................................................................................3
OUTDOOR UNIT INSTALLATION..............................................................4
REFRIGERANT PIPE..............................................................................12
ELECTRIC WIRING................................................................................19
TRIAL RUN.............................................................................................24
CUSTMER DETAILS................................................................................26
1. PRECAUTIONS
Precautions before reading the Installation manual.
This Installation manual is for the outdoor unit.
Refer to the indoor unit Installation manual to install indoor
parts.
Please read the power source unit Installation manual to install
the power source unit.
Please refer to the refrigerant distributor Installation manual to
install the refrigerant distributor.
There are two types of safety precautions - please read both carefully.
WARNING
Failure to observe a warning may result in death. The
appliance shall be installed in accordance with national
wiring regulations.
CAUTION
Failure to observe a caution may result in serious injury or
damage to the equipment.
After completing installation, ensure the unit works properly. Instruct
the customer on how to operate the unit, and tell them to store this
manual with the owner's manual for future reference.
WARNING
Only qualified service personnel should install, repair or
service the equipment.
Improper installation, repair, or maintenance may result in
electric shocks, short-circuiting, leaks, fires, or other damage to
the equipment.
PAGE
Follow these instructions carefully for installation.
Improper installation may cause water leaks, electrical shocks,
or fires.
When installing the unit in a small room, keep the refrigerant
concentration below the safety limit in case of leaks.
Contact the place of purchase for more information. Excessive
refrigerant in a closed ambient environment can lead to oxygen
deficiency.
Use the enclosed accessories and parts for installation.
Failure to do so may cause the unit to fall or cause water leaks,
electric shocks, or fires.
Install the unit in a stable location that can bear its weight.
Failure to do so may cause injury and damage the unit if it falls.
Follow national wiring regulations when installing the unit.
Do not install the unit in the laundry room.
Disconnect all electric circuits before accessing the
terminals.
Position the unit so that the plug is accessible.
Mark the direction of flow with a symbol or words.
Follow national wiring regulations when installing the unit,
and use an independent circuit and single outlet.
Insufficient electrical circuit capacity or faults can cause electric
shocks or fires.
Connect and clamp the specified cable firmly so that no
external force can affect the terminal.
A poor connection may cause a fire.
Route the wiring to fix the control board cover properly.
Improper installation may cause the terminal's connection point
to heat-up, which may cause electric shocks or fires.
Replace a damaged supply cord through the manufacturer
or agent to avoid hazards.
An all-pole disconnection switch having a contact separation
of at least 3 mm in all poles should be connected in fixed
wiring.
Do not let air or matter enter the refrigeration cycle when
connecting the pipes.
Air or foreign matter may lower capacity and raise pressure,
risking an explosion.
Installation manual
1