Table of Contents
Advertisement
Global Activity Mode
Activity Channel
Edit Action
Activity Sensitivity
Grid Editor
Reload Img (Red)
Set All (Green)
Clear All (Yellow)
Edit Mode
64
Three options are available for Activity activation).
Selecting 'Active while at Preset 1' will result in Activity mode
functioning only when the camera is at preset position 1. Select
'Active while camera not in motion' for Activity mode to function only
when the camera is still. Select 'Always Active' for Activity mode to be
in constant operation.
This is a drop down list of the video inputs on the unit, selecting an
input will display images from the corresponding video source.
Select 'Invert' to change the current grid state i.e. Clear to Set. Select
'Clear' to remove grids or select 'Set' to add grids.
This option allows the sensitivity setting to be established for the
activity grid being configured. There are five settings to choose from:
Indoor High, Indoor Low, Outdoor High, Outdoor Low,
Very Low.
Use the Grid Editor by placing cells in areas of the camera view
where movement will trigger an alarm. To enter cells navigate across
the image via the Directional buttons of the I.R Remote Control). If
viewing on a local monitor place a cell by pressing the OK button.
If viewing via the webpages, use the mouse to navigate across the
Draft
image, use the left mouse button to place a cell.
This option will update the still image displayed in the Grid Editor.
This option will insert a default square of 16 x 16 cells across the
displayed video image.
This option will clear all entered cells.
Leave as 'Normal'. Different Edit Mode functions will be added
following future development.
Dedicated Micros ©2010
Advertisement
Table of Contents
