Table of Contents
Advertisement
•
Minimum light requirement to produce a colour image approximately 0.15lux
•
Signal to noise better than 60dB
•
SD media slot
•
2 x EOL alarm inputs
•
500mA light duty relay output
Benefits
•
The camera supports recording to local SD card or network attached storage using ATA over
Ethernet
•
The latest technology provides low light performance superb image quality and colour fidelity in
variable and high contrast lighting conditions.
•
Operates seamlessly within a NetVu Connected network.
•
Telemetry support allows the camera to be paired with a Pan/Tilt housing
•
Remote configuration removes the need for multiple revisits
•
Images can be viewed over low bandwidth networks using MPEG-4 but captured in JPEG
•
BNC Connector allows local lens adjustment
•
Pre-Alarm allows the moments prior to an incident to be captured.
Components Supplied
Before installing unit, please verify that all items listed below have been supplied:
1 x CamVu camera
1x PoE injection cable
1 x User Guide
1 x CD containing information for use with the camera
1 x C/CS lens conversion ring
1 x 9DF-9DF RS232 communications cable
Note:
A PSU is not supplied with this camera. If the camera is used with Power Over Ethernet it is not
necessary to use a separate PSU (if power is available via the Ethernet connection). Otherwise
a suitable 12Vdc 0.5A PSU is required - VS-PSU15W-EXT can be purchased separately from
Dedicated Micros.
For future provision, the POE unit can be powered using the supplied injector and a 48Vdc PSU
that can supply 15W - DM/PSU/48V can be purchased separately from Dedicated Micros.
CE NOTICE (EUROPEAN UNION)
This section contains the regulatory declarations for the EU for the CamVu 2000 Camera.
This product is marked with the CE symbol and indicates compliance with all applicable Directives. A
"Declaration of Conformity" is held at Dedicated Micros Ltd, 1200 Daresbury Park, Daresbury, Cheshire WA4
4HS www.dedicatedmicros.com
Hereby, Dedicated Micros LTD, declares that this CamVu 2000 Camera is in compliance with the essential
requirements and other relevant provisions of Directive 95/5/EC.
Marking by the symbol CE indicates compliance of this Dedicated Micros product to the Electromagnetic
Compatibility Directive 89/336/EEC, and the Low Voltage Directive 73/23/EEC of the European Union. Such
marking is indicative that this system meets the following technical standards
4
Draft
Dedicated Micros ©2010
Advertisement
Table of Contents
