Table of Contents
Advertisement
advanced record
Draft
Menu View
Note:
When Advanced Record settings have been changed, it is not possible access the Simple
Record menu until the newly configured Advanced Record settings have been applied. To do
this, open the Record menu and select the 'Save' option. It will then be possible to return to the
Profile Record menu and access Simple Record.
Days Recording
Channel
Filter by
Unset/Set/Override Normal
Unset/Set/Override Event
Comp
Res
rate_kbps
Dedicated Micros ©2010
Switch to the Simple Profile Record menu.
Displays the record duration possible using the current configuration.
Displays the Camera Name.
Displays the Recording Settings.
Shows the recording profile used by the camera if no Timed
Schedules are applied and the camera is operating under Normal
(non Event) conditions. Refer to 'Schedule' for further information.
Shows the recording quality that will be used by the camera during
an Alarm or Event. Note that Set and Override schedules will be
used only when Timed Schedules are applied. Refer to 'Schedule' for
further information.
Select image compression format (MPEG or JPEG).
Select image resolution format (QCIF, CIF, 2CIF or 4CIF).
If MPEG4 is selected, the figure entered here will be the bit rate
allocated. A higher bit rate will provide better quality. MPEG bit rates
can be entered within the range of 45-2500K bits/second.
45
Advertisement
Table of Contents
