Installation; Installing The Outboard - Mercury 2.5 FourStroke Operation, Maintenance & Installation Manual

Installing the Outboard

BOAT TRANSOM HEIGHT REQUIREMENT
Measure the transom height of the boat. The anti‑ventilation plate should be
25–50 mm (1–2 in.) below the bottom of the boat.
a
INSTALLING THE OUTBOARD ON THE TRANSOM
1. Place the outboard on the centerline of the transom.
2. Tighten the transom clamp handles.
eng

INSTALLATION

19053
13
a - Anti‑ventilation plate
27005
19057