Corrosion Control Anode; Exterior Care - Mercury 2.5 FourStroke Operation, Maintenance & Installation Manual

2. Lift up the rear of the cowl and push it towards the front of the engine to
clear the front hook.
INSTALLATION
1. Engage the front hook and position the cowl over the engine.
2. Lock the rear cowl latch.

Corrosion Control Anode

Your outboard has a corrosion control anode installed on the gearcase. An
anode helps protect the outboard against galvanic corrosion by sacrificing its
metal to be slowly corroded instead of the outboard metals.
The anode requires periodic inspection especially in saltwater which will
accelerate the erosion. To maintain this corrosion protection, always replace
the anode before it is completely eroded. Never paint or apply a protective
coating on the anode as this will reduce effectiveness of the anode.

Exterior Care

Your outboard is protected with a durable baked enamel finish. Clean and wax
often using marine cleaners and waxes.
MAINTENANCE
28709
36
19043
eng