Clean Machine - Krups Nescafé Dolce Gusto Lumio KP130110 Service Manual

Beverage center
Table of Contents

Advertisement

Clean machine

1. Remove and empty water tank.
2. Clean water tank with a clean food-
safe brush and washing-up liquid as
needed.
3. Rinse water tank.
4. Fill water tank with fresh drinking
water and insert it into machine.
8. Remove and clean capsule holder 
p. 87.
9. Clean rinsing tool if necessary and
insert it in capsule holder.
10. Insert capsule holder into machine
and close locking handle. Machine
switches on automatically.
11. Place an empty container under
coffee outlet.
15. Wait until selection lever moves back
to middle position "STOP".
16. Remove and empty container.
M A I N T E N A N C E
5. Remove and empty drip tray.
6. Clean drip grid and drip tray with a
clean food-safe brush.
7. Rinse drip tray and insert it into
machine.
12. Set volume display to level 7 with
selector wheel.
13. Push selection lever to right position
"HOT" as soon as machine is ready.
14. Machine starts rinsing with hot water.
17. Open locking handle.
18. Pull out capsule holder and remove
rinsing tool.
Lumio service manual
93

Advertisement

Table of Contents
loading

Table of Contents