Standard Headsets - Cisco 6841 User Manual

Standard Headsets

Standard Headsets
You can use a standard headset with your desk phone.
Connect a Standard Headset
Standard headsets plug into the back of the phone.
Procedure
Plug the headset into the headset jack on the back of the phone and press the cable into the cable channel.
The headset jack is beside the handset jack.
Enable an E-Hookswitch Headset
Electronic Hookswitch headsets use a base station and a wireless headset. The base station plugs into your
phone headset jack. After installing the headset, you enable it on the phone web page.
The Cisco IP Phone 6851 supports Electronic Hookswitch headsets. The Cisco IP Phone 6841 does not support
these headsets.
Procedure
Step 1
Press Applications
Step 2 Select Settings > E-Hookswitch connected.
Step 3 Select Yes.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
72
.
Accessories