Compliance Information; Emc Compliance - Tektronix SPG8000A Installation And Safety Instructions

Compliance Information

This section lists the EMC (electromagnetic compliance), safety, and environmental standards with which the instrument
complies.

EMC compliance

EC Declaration of Conformity – EMC
Meets intent of Directive 2004/108/EC for Electromagnetic Compatibility. Compliance was demonstrated to the following
specifications as listed in the Official Journal of the European Communities:
EN 55103. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional
1 2
use.
Environment E2 – commercial and light industrial
■
Part 1 Emission
■
EN 55022. Class B radiated and conducted emissions
■
EN 55103-1 Annex A. Radiated magnetic field emissions
■
Part 2 Immunity
■
IEC 61000-4-2. Electrostatic discharge immunity
■
IEC 61000-4-3. RF electromagnetic field immunity
■
IEC 61000-4-4. Electrical fast transient / burst immunity
■
IEC 61000-4-5. Power line surge immunity
■
IEC 61000-4-6. Conducted RF immunity
■
IEC 61000-4-11. Voltage dips and interruptions immunity
■
EN 55103-2 Annex A. Radiated magnetic field immunity
■
EN 61000-3-2. AC power line harmonic emissions
EN 61000-3-3. Voltage changes, fluctuations, and flicker
Mfr. Compliance Contact.
Tektronix, Inc. PO Box 500, MS 19‐045
Beaverton, OR 97077, USA
www.tek.com
Australia / New Zealand Declaration of Conformity – EMC
Complies with the EMC provision of the Radiocommunications Act per the following standard, in accordance with ACMA:
EN 55022. Radiated and conducted emissions, Class B, in accordance with EN 55103-1.
■
1
For compliance with the EMC standards listed here, high quality shielded interface cables should be used.
2
Average half-cycle r.m.s. inrush current at initial switch-on: 1.8 A. Average half-cycle r.m.s. after 5 second power interruption: 1.6 A.
SPG8000A Installation and Safety Instructions 35