Inserting And Deleting Tabs; Adding A New Block - Brother PT-D800W User Manual

Printing a Label Using the P-touch Labeling System Keyboard

Inserting and Deleting Tabs

To insert a tab into an existing line of text, move the cursor to the position where you want the tab, and then
press the Tab key.
Tabs appear as a mark ( ) in the label creation screen.
To delete a tab from a label, position the cursor to the right of the tab mark ( ) on the label creation screen,
and then press the BS (Backspace) key.
Changing the Tab Length
Edit tab length before inserting tabs into your text.
The tab length can be set to between 0.0" and 4.0" (0 mm and 100 mm).
a
Press the Format key.
b
Select [Tab Length] using the
c
Select the tab length using the
Note
You can also set the tab length by typing in the tab length you want. To apply the setting, after typing in
the tab length, press the OK or Enter key, and then press the OK or Enter key again.

Adding a New Block

To create a new block of text and lines, press the Shift and Enter keys. The text to the right of the cursor will
be moved to the new block. In some label types, you can set the number of blocks when selecting the label
type. You can create up to 99 new blocks.
or key.
or key, and then press the OK or Enter key.
2
2
2
2
17