Deleting Text - Brother PT-D800W User Manual

Printing a Label Using the P-touch Labeling System Keyboard
Important
• Maximum number of lines (Labels)
• 1.4" (36 mm) tape: 17 lines
• 0.94" (24 mm) tape: 13 lines
• 0.70" (18 mm) tape: 10 lines
• 0.47" (12 mm) tape: 6 lines
• 0.35" (9 mm) tape: 4 lines
• 0.23" (6 mm) tape: 3 lines
• 0.13" (3.5 mm) tape: 1 line
• Maximum number of lines (Heat shrink tubes)
• 0.93" (23.6 mm) tape: 12 lines
• 0.69" (17.7 mm) tape: 10 lines
• 0.46" (11.7 mm) tape: 6 lines
• 0.34" (8.8 mm) tape: 4 lines
• 0.23" (5.8 mm) tape: 2 lines

Deleting Text

Deleting One Character at a Time
To delete a character from an existing line of text, move the cursor to the right of the position where you want
to start deleting text, and then press the BS (Backspace) key. The character to the left of the cursor is deleted
each time you press the BS (Backspace) key.
Deleting All Text at Once
a
Press the Clear key. The Clear options appear.
b
Using the or key, select [Text Only] to delete all text while retaining the current format settings,
or select [Text&Format] to delete all text and format settings.
Note
When you select [Text&Format], all text is cleared and the character attribute and cutting option settings
are reset to the factory settings.
2
2
2
2
15