Brother PT-D800W User Manual page 47

Printing a Label Using the P-touch Labeling System Keyboard
Faceplate
Labels of this type can be used to identify various faceplates. Blocks of text are evenly spaced on each label.
One block
Label Length: 2.0" (50 mm), 0.4-39.0" (10-999 mm)
# of Blocks: 1, 1-5
Orientation:
Cable Wrap
Labels of this type can be wrapped around a cable or wire. The text is rotated 90° counterclockwise and
printed.
UOM (Unit of Measure): Dia(Ø), Length, CAT5/6, CAT6A, COAX, AWG
Value: Varies depending on the UOM (Unit of Measure) setting
Repeat: On, Off
Note
When using Flexible ID Tape:
• We recommend using Flexible ID Tape for Cable Wrap labels.
• Labels made with Flexible ID Tape are not designed for use as electrical insulation.
• When wrapping labels around cylindrical objects, the diameter (1) of the object should be at least 0.12"
(3 mm).
• The overlapping (2) ends of the label or the label flag should be at least 0.2" (5 mm).
(Horizontal), (Vertical)
1
Two blocks
2
2
2
2
36