Wireless Lan Tab - Brother PT-D800W User Manual

Changing System Settings

Wireless LAN Tab

TCP/IP (Wireless)
Boot Method
Select AUTO, BOOTP, DHCP, RARP or STATIC.
IP Address/Subnet Mask/Gateway
Specifies the various networking values.
You can enter these settings only when the IP address is set to STATIC.
DNS Server Method
Select AUTO or STATIC.
Primary DNS Server IP Address/Secondary DNS Server IP Address
You can enter these settings only when the DNS server is set to STATIC.
IPv6
Static IPv6 Address
Specifies a permanent IPv6 address.
Enable this address
Enables the specified static IPv6 address.
Primary DNS Server IPv6 Address/Secondary DNS Server IPv6 Address
Specifies the DNS server IPv6 addresses.
IPv6 Address List
Displays the list of IPv6 addresses.
Wireless Settings
Communication Mode
Select Infrastructure or Ad-hoc.
SSID (Network Name)
Clicking Search displays the available SSID selections in a separate dialog box.
Channel
Lists available channels.
Note
This setting is valid only in Ad-Hoc mode.
Authentication Method/Encryption Mode
The supported encryption modes for the authentication methods are as shown in Communication Modes
and Authentication Methods/Encryption Modes on page 91.
WEP Key
You can specify a setting only when WEP is selected as the encryption mode.
6
6
6
6
6
90