Brother PT-D800W User Manual page 78

Printing Using a Computer
WPS (Wi-Fi Protected Setup™)
If your wireless access point/router supports WPS, you can configure settings and connections wirelessly.
a
First, confirm that your wireless access point/router has the WPS symbol.
b
Select [Settings] in the Home screen using the , ,
key.
c
Select [WLAN] using the
d
Select [Infrastructure Mode] using the
e
Select [Network Setting] using the
f
Place your P-touch labeling system within the range of your wireless access point/router. The range
may differ depending on your environment. See the instructions provided with your wireless access
point/router.
g
Select [Button Push] using the
h
Press the OK or Enter key for a message that appears before the [Start WPS on Your Wireless
Access Point].
The [Start WPS on Your Wireless Access Point] message appears.
i
Press the WPS button on your wireless access point/router, and then press the OK or Enter key on
your P-touch labeling system.
j
[Connecting...] appears for a while, and then [Connected!] appears.
k
Press the OK or Enter key.
The screen returns to the [Settings] menu screen.
Depending on the strength of the wireless signal, the wireless connection indicator may show one of
the following symbols:
Note
• If you start the setup wizard for the Infrastructure mode or select the network settings for the Direct mode
when the wireless function of the P-touch labeling system is turned off, [Turning on Wi-Fi Radio]
appears and the wireless function turns on automatically (or after the OK key is pressed). It is no longer
necessary to turn the Infrastructure mode or Direct mode on manually.
• Your P-touch labeling system will try to connect using WPS for two minutes. If the
pressed and held during that time, the P-touch labeling system will continue trying to connect for an
additional two minutes.
or key, and then press the OK or Enter key.
or
or key, and then press the OK or Enter key.
or key, and then press the OK or Enter key.
or key, and then press the OK or Enter
key, and then press the OK or Enter key.
4
(Wi-Fi) Button is
67