Wireless Direct Tab; Applying Setting Changes To Multiple Printers - Brother PT-D800W User Manual

Changing System Settings

Wireless Direct Tab

Wireless Direct Settings
SSID (Network Name)/Network Key
Specifies the SSID (25 ASCII characters or fewer) and the network key (63 characters or fewer) you want
to use in the Wireless Direct mode.
Note
The factory settings for the SSID and password are as follows:
SSID: "PT-D800W" or "DIRECT-*****_PT-D800W". "*****" is the last five digits of the product serial
number.
Password (Network key): 00000000

Applying Setting Changes to Multiple Printers

a
After applying settings to the first printer, disconnect the printer from the computer, and then connect the
second printer to the computer.
b
Select the newly connected printer from the Printer drop-down list.
Note
If the Automatically detects the connected printer, and retrieves the current settings. check box in
the Option Settings dialog box is selected, the printer connected with the USB Cable is automatically
selected.
For more information, see Communication Settings for Windows
c
Click Apply.
The same settings that were applied to the first printer are applied to the second printer.
Note
We recommend selecting the Automatically restart the printer after applying new settings check box
when configuring the first printer so that you can confirm that a connection with the wireless access
point/router can be correctly established with the settings. For more information, see Communication
Settings for Windows
d
Repeat steps a – c for all printers whose settings you want to change.
Important
If the IP address is set to STATIC, the printer's IP address will also be changed to the same address as
the first printer.
Change the IP address if needed.
®
on page 85.
®
on page 85.
6
6
6
6
92