Before First Use; Initial Cleaning; Setting The Time; Changing The Time Of Day - AEG KM4400001 User Manual

www.aeg.com
8

4. BEFORE FIRST USE

WARNING!
Refer to the Safety chapters.

4.1 Initial Cleaning

• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and
Cleaning".

4.2 Setting the time

After the first connection to the mains,
all symbols in the display are on for
some seconds. For the subsequent few
seconds the display shows the software
version.
After the software version goes off, the
display shows
flashes.
1.
Press
hour.
2.
Press
for the first setting. Later the new

5. DAILY USE

WARNING!
Refer to the Safety chapters.
To use the appliance, press the control
knob. The control knob comes out.
5.1 Activating a heating
function
1.
Turn the knob for the oven function
to select an oven function.
and "12:00". "12"
or to set the current
to confirm (necessary only
Baking tray
For cakes and biscuits.
time will be saved automatically after
5 seconds).
The display shows
hour. "00" flashes.
3.
Press or
nutes.
4.
Press to confirm (necessary only
for the first setting. Later the new
time will be saved automatically after
5 seconds) .
The Temperature / Time display
shows the new time.

Changing the time of day

You can change the time of day only if
the oven is off.
Press . The set time and symbol
flash in the display. To set a new time,
use the procedure "Setting the time".
2. Turn the knob for the temperature /
microwave power to set a tempera-
ture.
3. To deactivate the appliance, turn the
knob for the oven function to the off
position ("0") .
and the set
to set the current mi-