Download Print this page

What To Do If - AEG KM4400001 User Manual

Hide thumbs

Advertisement

Table of Contents
Installing the shelf support
To install the shelf support follow the
procedure in the opposite order.
11.2 Lamp
WARNING!
There is a risk of electrical shock.
The lamp and the lamp glass
cover can be hot.
Before you change the lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or
deactivate the circuit breaker.

12. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The lamp does not oper-
ate.
The display shows an er-
ror code that is not on
this list.
Problem
Replacing the lamp at the cavity
ceiling:
1.
2.
3.
4.
Possible cause
The appliance is deacti-
vated.
The clock is not set.
The necessary settings
are not set.
The automatic cut-out is
activated.
The fuse is released.
The lamp is defective.
There is an electrical
fault.
CAUTION!
Put a cloth on the bottom of the
interior of the appliance. It pre-
vents damage to the lamp glass
cover and the cavity.
Always use the same lamp type.
Turn the lamp glass cover counter-
clockwise to remove it.
Clean the glass cover.
Replace the lamp with a suitable 300
°C heat-resistant lamp.
Install the glass cover.
Remedy
Activate the appliance.
Set the clock. Refer to
"Setting the clock".
Make sure that the set-
tings are correct.
Refer to "Automatic
switch-off".
Make sure that the fuse
is the cause of the mal-
function. If the fuse re-
leases again and again,
contact a qualified elec-
trician.
Replace the lamp.
• Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows
the error code again,
contact the Customer
Care Department.
ENGLISH
33

Advertisement

Table of Contents
loading

  Related Manuals for AEG KM4400001

This manual is also suitable for:

Km4400021