Microwave Mode; Setting The Microwave - AEG KM4400001 User Manual

10 www.aeg.com
5.3 Display
G
5.4 Buttons
Button
5.5 Heat-up / Residual heat
indicator
If you activate an oven function, the bars
in the display

6. MICROWAVE MODE

6.1 Setting the Microwave

function
1. Turn the knob for the oven functions
to select a microwave function
The display shows a default micro-
wave power and then a default value
of the Duration function.
2.
Press
temperature / microwave power
to change the microwave power
settings.
The power settings changes in 100
W steps.
A
F E
Function
CLOCK
MINUS, PLUS
,
MICROWAVE
TEMPERATURE
come on one by one.
and turn the knob for the
B C A) Timer
B) Heat-up and residual heat indicator
C) Water drawer (selected models only)
D) Core temperature sensor (selected
models only)
E) Door lock (selected models only)
D
F) Hours / minutes
G) Clock functions
Description
To set a clock function.
To set the time.
To set the MICROWAVE.
To check the oven temperature or
the temperature of the Core Tem-
perature Sensor (if applicable). Use
only while an oven function is in op-
eration.
The bars show that the oven tempera-
ture increases or decreases.
3.
Press
the Duration settings.
The appliance automatically starts to
operate after few seconds.
.
4. When the set time ends, an acoustic
signal sounds and the Microwave
function deactivates automatically.
5. Turn the knob for the oven functions
to off position ("0").
and then /
CAUTION!
Do not let the appliance operate
when there is no food in it.
to change