Table of Contents
Advertisement
Alcatel-Lucent
3.6.4 Connecting for Configuration
The OA58XX-NW router has a RJ45female connector on the front panel known as " Conf." , which provides access to
the device's local console.
For further information, please see section
Conf Connector
Fig. 36:
3.7 Optional Storage
The OA58XX-NW allows you to expand its feature set through applications executed by the second CPU core.
To make these features available, the device must have an internally installed hard disk or a USB flash memory ex-
pansion.
3.7.1 Procedure to install a hard disk
To correctly insert a hard disk, please follow these steps:
(1) Switch off the device and remove the data cables as described in section
(2) Remove the device from the workplace and place it in a stable, safe place where it can be easily accessed and
handled. Open up the device. To do this, you need to remove the top cover (secured through screws located on
the rear and side of the device).
(3) Once the screws have been removed, slide the cover towards the rear panel and lift it. Place it in a safe loca-
tion.
(4) Locate the hard disk area and the SATA connector for this.
OA58XX-NW Router
Connecting to the device
on page 27.
3 Components and Power Supply
Disconnecting
on page 17.
23
Advertisement
Table of Contents
