Table of Contents
Advertisement
Alcatel-Lucent
Front panel LEDs table
LED
On
USB
HD
3G
WiFi
SLOT
xDSL
In addition to the LEDs described in the above table, the front panel also has LEDs for the Gigabit and Switch Ether-
net interfaces.
Gigabit Ethernet interface LEDs
Fig. 3:
The following table offers information on the LEDs associated to the Gigabit Ethernet interfaces:
Gigabit Ethernet interface LEDs table
LED
Orange
OA58XX-NW Router
Description
Power-on indicator.
Shows the state of the device con-
nected to the USB connector.
Indicates the activity of the internal
Hard Disk.
Not supported
Not supported
Depends on the card installed in the
PCI slot.
Shows the status of the xDSL inter-
face.
Description
Ethernet connection speed
3 Components and Power Supply
State
It lights up when connected to the
power.
Off -> Device not connected, not de-
tected or incompatible.
Green -> Compatible device detec-
ted.
Off -> Hard disk is not connected or is
inactive.
Green -> If flashing, there is activity
on the hard disk.
Not supported
Not supported
Off -> Interface not available or not
installed (not supported).
Red -> Interface not found, no data
connection.
Yellow -> Connecting.
Green -> Communications estab-
lished.
Off -> Interface not available or not
installed (not supported).
Red -> Interface not found, no data
connection.
Yellow -> Connecting.
Green -> Communications estab-
lished.
State
Off -> Link has not been detected
Orange ->
5
Advertisement
Table of Contents
