RED TECNIKA 28 Use And Installation Manual page 51

Chapter
red
TECNIKA 28-35
8
USE AND INSTALLATION MANUAL
page 51
Figure 8.1.7 View of turbolators extracted from boiler.
EXPLANATION: the boiler turbolators are mutually different from one another. It is important to remember
their position for putting them back correctly: one turbolator has shorter and curved elements.
Consequently, in practice arranging the elements incorrectly is not possible due to the particular shape of
the boiler.
Ash must be cleaned from the convective ducting of the boiler as shown in the figure below.
Figure 8.1.8 Remove ash deposits from the heat exchanger of the convective ducting of the boiler with a
brush.
Cleaning and maintenance Technical dept. - All rights reserved - Reproduction prohibited