Submenu Time And Date - Funkwerk bintec R230aw User Manual

System time
Note
System
6

Submenu Time and Date

The fields of the T
IME AND
R232bw Setup Tool
[SYSTEM][TIME]: Control System Time and Date
Current System Time: Wed 2005/Feb/28 19:19:37 setby: None
Change System Time:
Time Update Interval
Update System Time from ISDN :
System Time Offset from GMT
Time Servers:
Name/Address
1:
2:
3:
SAVE
You need the system time for tasks such as correct timestamps for system mes-
sages, accounting or IPSec certificates.
You can derive the system time:
■
automatically, e.g. via different time servers.
■
manually in the gateway.
If a method for deriving the time automatically is set in the gateway, the values
obtained in this way have higher priority. Any system time entered manually is
overwritten.
The menu for the configuration of the time retrieval is accessible via the S
➜
menu (S T
YSTEM IME AND
To assure that your gateway uses the correct current time, it is recommended
to configure time servers.
D submenu are described below.
ATE
Funkwerk Enterprise Communications GmbH
2005/Feb/28 19:19:17
: 86400 Seconds
disabled
: 0 Seconds
Protocol
SNTP
SNTP
SNTP
CANCEL
D ).
ATE
Submenu Time and Date
MyGateway
CHANGE
YSTEM
bintec User's Guide
6
35