Extron electronics SMP 111 User Manual page 90

Command and Response Tables (continued)
SIS Command
Command
Function
(Host to Device)
Horizontal Size
E X1#
Specific value
E
Increment value
E
Decrement value
E
View
NOTE
Horizontal size values are adjusted in multiples of 8. If a value is entered that is not a multiple of 8, the closest
:
acceptable value is applied and returned.
Vertical Size
E X1#
Specify a value
E
Increment value
E
Decrement value
E
View
NOTE: Vertical size values are adjusted in multiples of 2. If a value is entered that is not a multiple of 2, the closest acceptable
value is applied and returned.
Video Mute
Enable blanking
1B
Disable blanking
0B
View
B
Test Pattern
E X1$
Select test pattern
E
Turn test pattern off
E
View test pattern
HDCP Settings
E
View HDCP status
E
Set input HDCP
authorization on
E
Set input HDCP
authorization off
E
View input HDCP
authorization
E
Enable HDCP
notification
Disable HDCP E
notification
E
View HDCP
notification
X*
= On/off
NOTES:
X(
= HDCP status
X1#
= Horizontal and vertical size
X1$
= Test patterns
X3#
= Mute status
Response
(Device to Host)
}
HSIZ Hsiz
}
+ HSIZ Hsiz
}
− HSIZ Hsiz
} X1# ]
HSIZ
}
VSIZ Vsiz
}
+ VSIZ Vsiz
}
− VSIZ Vsiz
} X1# ]
VSIZ
Vmt1
Vmt0
X3# ]
}
TEST Test
}
OTEST TestO
} X1$]
TEST
} X(]
IHDCP
}
E1HDCP HdcpE1
}
E0HDCP HdcpE0
} X*]
EHDCP
}
N1HDCP HdcpN1
}
N0HDCP HdcpN0
} X*]
NHDCP
0 = Disabled/unassigned/off/unmuted (Default),1 = Enabled/assigned/on/muted.
0 = No sink/on/source detected, 1 = Sink/source detected with HDCP
2 = Sink/source detected but no HDCP
00120 to 04096 (5‑digit response).
0 to 8 (see page 67).
0 = Unmuted (Default), 1 = Muted.
X1#]
X1# ]
X1# ]
X1# ]
X1#]
X1# ]
]
]
X1$]
]
]
]
]
]
SMP 111 • Remote Communication and Control
Additional Description
X1#
Set horizontal size to .
Increase the width of the
window.
Decrease the width of the
window.
View current setting.
X1#
Set vertical size to .
Increase the height of the
window.
Decrease the height of the
window.
View current setting.
Blanks video output.
Displays video output.
View the blanking status.
View HDMI input status.
Turn HDCP authorized device
on for input. HDCP off = default.
Turn HDCP authorized device
off for input. HDCP off = default.
Enable green screen (Default).
Disable green screen and mute
output.
82