174074-1CD
10.1 Settings for Manual Conveyor Function
10.1.1
Setting the Conveyor Position
Operation
1
Move the cursor to the desired
value in the column of the
{SET (mm)}.
2
Enter a value using the
numeric keys.
10.1.2
Enabling/Disabling the Setting
Operation
1
Move the cursor to the desired
value in the column of the
{SET}.
2
Press [SELECT].
10.2 Precautions
10.2.1
When the Power is Turned ON
When the power is turned ON, all the setting for the Manual Conveyor Function are disabled regardless
of the play or teach mode, and the actual conveyor positions are indicated in {CURRENT (mm)}.
When the MANUAL CONVEYOR window is called up after the power is turned ON, "
the column of {SET (mm)}. The set conveyor positions are retained until the power is turned OFF.
• When the teach mode is switched to the play mode while the Manual Conveyor Function
NOTE
is enabled, the function is automatically disabled.
• The MANUAL CONVEYOR window can be viewed only in the teach mode.
• The Manual Conveyor Function is enabled only when the turntable synchronized function
is disabled.
"VALID" and "INVALID" switch alternately.
10-2
10 Manual Conveyor Function
Explanation
Explanation
***
HW0482711
" appears in
79 of 86