Installation Steps; Step 1: Install The Adsp Appliance - Motorola SV-4250-P-1 - AirDefense Enterprise Appliance 4250 Quick Installation Manual

Appliance Quick Installation Guide
6
3

Installation Steps

3.1 Step 1: Install the ADSP Appliance

The first step in deploying AirDefense Services Platform is to physically install the appliance in a rack
and connect the cables.
NOTE
1. Install the ADSP appliance in an equipment rack using the rails provided.
For 1U Appliance (see detailed instructions included in each rail kit box)
a. Assemble Inner Rail to Chassis
i. Release inner rail by pressing the latch.
ii. Fasten the inner rail to chassis by using M4 screws.
b. Mount Outer Rails to Rack Posts
i. Use black screws and washer to mount front and rear extension brackets to outer
rail. Do not tighen as to allow adjustment.
ii. Mount the outer rail to the rack posts using M5 screws. If the posts do not have
threads, you can mount using the L shaped M5 threaded bracket. Sandwich the
outer rail between the post and the bracket. After the outer rails are mounted,
tighten the black screws.
c. Insert the Chassis into the Cabinet
i. Align inner and outer rail then push the chassis in. Push the latch to allow full
insertion of chassis complete.
For 2U Appliance (see detailed instructions included in each rail kit box)
a. Disassemble the slide rail by pushing down hook to separate.
b. Fasten 8 screws to fix inner rails on chassis.
c. Fasten L shape and out piece of rail together.
d. Mount L shape and external rail to rack frame.
e. Insert chassis to frame.
The handles in front of the unit are intended only for sliding it in and out
of the rack. The handles are not to be used for carrying the appliance.